Shunyata
Research’s new Reference Line power
cords were developed using the same
materials science and technologies
that make the Omega QR the market’s
ultimate cost-no-object power cord.
The Reference Line power cables are
designed to be used with the worlds
finest audio components. There are
three levels of performance in the
Reference Line starting with the
Delta v2 NR and Delta v2 XC models.
The Alpha v2 is a level up from the
Delta v2 model with the Sigma v2
taking the top spot in the line. All
Reference models feature Shunyata
Research’s exclusive VTX-Ag
conductors that combine an ultra
pure silver with a concentrically
wound layer of OFE copper. This
provides the speed and transparency
of silver with the richness, tonal
color and power of pure copper.
Shunyata Research’s own CopperCONN
connectors propel the Delta v2
cables to previously unattainable
levels of performance. Reference XC
cables are designed specifically to
optimize the performance of Shunyata
Research power conditioners. The
Delta v2 XC cables eschew noise
reduction features in favor of
enhanced DTCD dynamic transient
current delivery. Using proprietary
conductors and parts developed for
the Omega XC, the Delta v2 XC
delivers pace-setting DTCD
instantaneous current delivery,
optimizing power conditioner and
high-current amplifier
performance.The Delta v2 XC is an
ideal power cable for your Shunyata
Research power conditioner while the
Delta v2 NR provides noise reduction
to the source components. The Delta
v2 NR provides great performance for
all of the source equipment like CD
players, DACs, tuners and
preamplifiers while the Delta v2 XC
is a good choice for some
high-current amplifiers.
Recommended Power Conditioners
Hydra Delta D6 / Hydra Alpha A12
DTCD™ Analysis is a technique
that measures instantaneous current
through low impedance electrical
conductors and contacts. Shunyata
Research uses it to optimize the
design, specification and
construction of parts and materials
to ensure maximum current delivery
performance. Each part, conductor,
noise circuit and material inside
the Delta allows for maximum
throughput of instantaneous current.
Listeners will experience
earth-shaking low-frequency
performance from even the
highest-current amplifiers as well
as dynamic contrasts unheard of
outside of a live event. More than
any other design parameter, Shunyata
Research’s skill at reducing
impedance and improving dynamic
instantaneous current is
unparalleled.
CopperCONN™ Connectors
Shunyata Research has developed its
own line of CopperCONN™ Carbon Fiber
superior conductivity compared to
bronze or brass type connectors. The
internal contacts are culled from
solid OFE copper and feature a
high-tension, spring-loaded contact
for a vice-like grip. This
contributes to a measurable
improvement in DTCD™ performance and
a correspondingly obvious difference
in audible performance. CopperCONN™
connectors have a measurably lower
contact-junction resistance and are
hermetically sealed with an inert
compound that protects the contacts
and wires from corrosion. This also
ensures that the wires cannot become
loose, fray or pull out from the
head shell. This guarantees a
lifetime of reliable performance
that does not degrade over time.
ArNi® wire was designed by
Shunyata Research to be the finest
quality wire available. It begins
with the highest purity of copper
and silver metals available,
including Ohno (single crystal),
PCOCC silver and OFE C0101
conductors. Fluorocarbon dielectrics,
usually only found in aerospace
applications that have exceptional
electrical characteristics including
extremely low dielectric absorption,
high dielectric strength and superb
heat resistance. When used in
digital wiring it significantly
reduces transient energy storage and
release which affects phase noise
performance. And finally every cable
undergoes our proprietary KPIP™
process.
VTX-Ag
cables are uniquely constructed with
both an inner, center conductor made
of pure silver and an outer
concentric ring conductor made of
pure copper. It is made using the
finest fluorocarbon insulation to
minimize dielectric absorption and
re-radiation which translates to an
improvement in resolution and
clarity. VTX-Ag delivers the speed
and clarity of silver and the
midrange warmth and three
dimensional power in the lower
octaves of copper without imparting
any of the negatives associated with
either metal. The best qualities of
silver and copper combined.
Shunyata
Research uses only the highest
purity of copper available for the
production of its wire products. OFE
Alloy 101 or C10100 is the highest
grade of copper with a minimum
99.99% purity and a conductivity
rating of 101% IACS. OFE stands for
oxygen-free electrolytic and
supersedes the term OFHC (oxygen-free
high conductivity). C10100 is the
only grade of copper that comes with
a written certification of purity.
Certified by ASTM F68 C10100.
Fluorocarbon dielectrics are usually
only found in wire used in the
aerospace industry, satellites and
only the most expensive audiophile
cabling. It has special electrical
characteristics; very low dielectric
absorption, high dielectric strength
and exceptional heat resistance.
When used in audio and power cables
is reduces the perception of dynamic
compression and it improves sonic
low-level resolution and clarity.
Crystal clear transient detail
Simple
crimping, soldering, brazing and
screws are all inferior methods of
joining two wires or terminals
together. Sonic welding uses
high-energy sonic waves to literally
join two metals together at a
molecular level and cold-welding
uses high-energy pneumatic pressure
to bond metals. Shunyata Research
uses both methods to secure
connections that do not degrade over
time. Superior contact and wire
connections.
Kinetic Phase Inversion
Processing was developed by
Caelin Gabriel after years of
research into the underlying causes
of various effects such as burn-in,
wire directionality and the effects
of cryogenic treatment. He
discovered that there was an
underlying core principle that
burn-in and cryogenics only
partially addressed. Once the
governing principle was understood
it became possible to create a
processor that reduces the need for
long burn-in periods and eliminates
the effects of cryogenic treatment.
Four-days of continuous KPIP™
processing dramatically reduces the
sonic ups and downs associated with
burn-in, delivering a relaxed and
natural presentation.
Specifications
- Cable Type: VTX-Ag 10
- Conductors: ArNi® / OFE
- Dielectric: fluorocarbon
- Connectors: CopperCONN™
- Noise Reduction: NA
- HARP Module: NA
- KPIP Processing: 4-days
- Standard Length: 1.75 meters
- Safety Assurance: Continuity and
polarity tests – by two technicians
HiPOT tests insulation breakdown @ 4,500 VAC
Voor de beschikbare types
en lengtes van
deze kabel raadpleeg de
prijslijst. |